Phone: 1-(800) 708-6649 This is a printer friendly page for product number KVM-999ZC144 from our online catalog. If you have any questions, please contact us at (800) 708-6649 Prices shown are valid on 06/04/2020 and are subject to change.
Product Number: KVM-999ZC144
Knape and Vogt 144" Lower Channel - For use with KV Roll-Ezy 1/4in. Ball-Bearing Track system - EACH (Zinc)
Knape and Vogt Lower Channel. Balls ride freely on curved anvil with no contact against side of lower track.
Component for use with KV Roll-Ezy 1/4in. Ball-Bearing Track system.
NOTE: This item is oversized due to it's length and will incur an oversized freight surcharge starting at $125 unless it is cut down shorter that 9ft. Please specify in the comment section if you would like it cut and at what increment (we will cut to whole feet only).Please call if you have any questions.
Product Info: Manufacturer: Knape and Vogt Collection: Knape and Vogt Roll-EZY Ball-Bearing Track Color/Finish: zinc Type: door track channel Usually ships in 1 to 3 business days
Product Dimensions: Length: 144" Width: 1" Height: 1" Installation Notes & Recommendations: Knape and Vogt does not recommend butt-joints and/or openings longer than 12 feet. Knape and Vogt recommends that the height to width ratio for glass doors should not exceed 2:1. Glass is cut 1-1/4in. lower than height of opening.